Otywell | Producator de detectoare de gaz
Descriere
The flame detector uses IoT infrared sensors and a smart cloud IoT management platform to address the traditional problems of “difficult detection, late detection, and difficult networking” in fire monitoring. It enables early detection, early warning, and early response to forest fires, thereby avoiding greater losses. The detector also has an anti-tampering feature that triggers an alarm if the detector is moved abnormally.
Funcții Caracteristici
- SOLAR POWER SUPPLY
- Solar energy reserve + military lithium battery backup
- Very low power consumption, no power supply required!
- BUILT-IN BATTERY 10000MA
Parametrii tehnici
| Principiul de detectare | red/UV light |
| Wavelength range | infrared 4.4μm ultraviolet 185 ~ 260nmUV |
| Specificația bateriei | 3.6V/10000mAh |
| Solar energy | 2X1W |
| Camera | 30W pixels |
| Spirit acuity | Nivel 1 |
| Timp de răspuns | < 30s |
| Preheating time | 60s |
| Flame detection delay | 3S |
| Temperatura mediului ambiant | -10℃ ~ 55℃; The maximum surface temperature of the shell shall not exceed 80℃ |
| Umiditatea relativă | < 93%RH |
| Explosion-proof mode | tip ignifug |
| Grad rezistent la explozie | Ex dⅡC T6Gb |
| Grad de protectie | IP67 |
| Indicator | green indicates early warning, red indicates alarm, blue data upload, yellow fault |
| Greutate | ≤1200g |
| Dimensiuni | 235mm x170mm x125mm (without antenna) |
| Limita de presiune | 86KPa ~ 106KPa |
| Use place | Use in dangerous places with explosive combustible gas IIA~IIC class and temperature group of T1~T6 |
TAG: otywell Flame Detector，Solar-powered Flame Detector，IR Flame Detector ，UV Flame Detector，UV & IR Dual Spectrum Flame Detector
E-mail:inquiry@otywell-safety.com
Mobile/WhatsApp:+8616692113216
WeChat
Scanați codul QR cu WeChat