Otywell | Fabricante do Analisador de Gás
Descrição
The flame detector uses IoT infrared sensors and a smart cloud IoT management platform to address the traditional problems of “difficult detection, late detection, and difficult networking” in fire monitoring. It enables early detection, early warning, and early response to forest fires, thereby avoiding greater losses. The detector also has an anti-tampering feature that triggers an alarm if the detector is moved abnormally.
Recursos de funções
Parâmetros Técnicos
| Princípio de detecção | red/UV light |
| Wavelength range | infrared 4.4μm ultraviolet 185 ~ 260nmUV |
| Especificação da bateria | 3.6V/10000mAh |
| Solar energy | 2X1W |
| Camera | 30W pixels |
| Spirit acuity | Level 1 |
| Tempo de resposta | < 30é |
| Preheating time | 60é |
| Flame detection delay | 3S |
| Temperatura ambiente | -10℃ ~ 55℃; The maximum surface temperature of the shell shall not exceed 80℃ |
| Umidade relativa | < 93%RH |
| Explosion-proof mode | Tipo à prova de chama |
| Grau à prova de explosão | Ex dⅡC T6Gb |
| Grau de proteção | IP67 |
| Indicator | green indicates early warning, red indicates alarm, blue data upload, yellow fault |
| Peso | ≤1200g |
| Dimensões | 235mm x170mm x125mm (without antenna) |
| Pressure limit | 86KPa ~ 106KPa |
| Use place | Use in dangerous places with explosive combustible gas IIA~IIC class and temperature group of T1~T6 |
WeChat
Digitalize o código QR com WeChat