오티웰 | 가스 분석기 제조업체
설명
The flame detector uses IoT infrared sensors and a smart cloud IoT management platform to address the traditional problems of “difficult detection, late detection, and difficult networking” in fire monitoring. It enables early detection, early warning, and early response to forest fires, thereby avoiding greater losses. The detector also has an anti-tampering feature that triggers an alarm if the detector is moved abnormally.
기능 특징
기술적인 매개변수
| 감지 원리 | red/UV light |
| Wavelength range | infrared 4.4μm ultraviolet 185 ~ 260nmUV |
| 배터리 사양 | 3.6V/10000mAh |
| Solar energy | 2X1W |
| Camera | 30W pixels |
| Spirit acuity | Level 1 |
| 응답 시간 | < 30에스 |
| Preheating time | 60에스 |
| Flame detection delay | 3에스 |
| 주변 온도 | -10℃ ~ 55℃; The maximum surface temperature of the shell shall not exceed 80℃ |
| Relative humidity | < 93%RH |
| Explosion-proof mode | 방염형 |
| 방폭등급 | Ex dⅡC T6Gb |
| 보호 등급 | IP67 |
| Indicator | green indicates early warning, red indicates alarm, blue data upload, yellow fault |
| 무게 | ≤1200g |
| 치수 | 235mm x170mm x125mm (without antenna) |
| Pressure limit | 86KPa ~ 106KPa |
| Use place | Use in dangerous places with explosive combustible gas IIA~IIC class and temperature group of T1~T6 |
위챗
wechat으로 QR 코드를 스캔하세요