JB-TB-GDB11 Combustible Gas Alarm Controller

설명

GDB11 gas alarm controller mainly receives the detection data of on-site gas detectors. When the preset alarm value is reached or exceeded, it will immediately send out sound and light alarms to remind the safety personnel to take safety measures in time. At the same time, it will automatically start the on-site fan or cut off the gas source to prevent poisoning/explosion and fire, thereby protecting the lives of personnel and the property safety of enterprises.

기능 특징

★Chinese key operation
★High and low alarm points can be freely set
★Built-in sound and light alarm lamp
★Switch output for -way alarm control
★With password management function, important operations require password verification
★Two sets of pulse relay signal output
★Time management and display function

기술적인 매개변수

★Display mode: digital tube display
★Working power supply: AC220V+10%
★Installation method: on-site fixed installation, wall-mounted
★Networking capacity: 2-way RS485/4-20mA signal input
★Alarm mode: sound and light alarm
★Alarm point: two-level alarm, can be freely set by the user
★Power supply voltage: AC220V+10% 50HZ
★Relay capacity: 3A
★Working temperature: (0~50)°C
★Relative humidity: (20~93)%RH
★Storage temperature: (-10~ 50)°C
★Pressure range: (86~ 106)KPa
★Cable requirements: Bus: RVVP 4×1.5mm2
★Transmission distance: ≤1 500m