オーティウェル | ガスアナライザーメーカー
説明
The flame detector uses IoT infrared sensors and a smart cloud IoT management platform to address the traditional problems of “difficult detection, late detection, and difficult networking” in fire monitoring. It enables early detection, early warning, and early response to forest fires, thereby avoiding greater losses. The detector also has an anti-tampering feature that triggers an alarm if the detector is moved abnormally.
機能機能
技術的なパラメーター
| 検出原理 | red/UV light |
| Wavelength range | infrared 4.4μm ultraviolet 185 ~ 260nmUV |
| バッテリー仕様 | 3.6V/10000mAh |
| Solar energy | 2X1W |
| Camera | 30W pixels |
| Spirit acuity | Level 1 |
| 応答時間 | < 30s |
| Preheating time | 60s |
| Flame detection delay | 3S |
| 周囲温度 | -10℃ ~ 55℃; The maximum surface temperature of the shell shall not exceed 80℃ |
| Relative humidity | < 93%RH |
| Explosion-proof mode | フレームプルーフタイプ |
| 防爆グレード | Ex dⅡC T6Gb |
| 保護等級 | IP67 |
| Indicator | green indicates early warning, red indicates alarm, blue data upload, yellow fault |
| 重さ | ≤1200g |
| 寸法 | 235mm x170mm x125mm (without antenna) |
| Pressure limit | 86KPa ~ 106KPa |
| Use place | Use in dangerous places with explosive combustible gas IIA~IIC class and temperature group of T1~T6 |
wechat
QRコードをWeChatでスキャンします