Capteur de méthane laser

Description

The laser methane telemetry optical component uses tunable laser spectral absorption (TDLAS) technology to accurately measure the target gas. The laser and detector integrated in the telemetry optical component realize high-precision, high-density, and high-reliability miniaturized integrated packaging; the telemetry optical component adopts an excellent optical system to achieve the lowest (optical noise) while maximizing the signal-to-noise ratio, ensuring the advantages of high telemetry accuracy and fast response of the telemeter. It can match most of the handheld laser methane telemeters and telemetry pan/tilts on the current market.

Fonctions fonctionnalités

 

 

 

Paramètres techniques

argument		Minimum value	Typical value	Maximum value	unité
Conventional parameter
Température de stockage		-40	–	85	℃
Température de fonctionnement		-40	–	60（70）	℃
Humidité de fonctionnement (sans condensation)		–	–	98	%RH
Pression de travail		80	–	116	kPa
Plage de mesure		0	–	100	%Lel
Basic error		Normal temperature and pressure		±3%LEL	–
		Overall condition		±7%LEL	–
Temps de réponse		–	15	–	s
Minimum resolution		0.01			%Vol
Communication interface
TTL	Baud rate	–	115200	–	baud
	Stop bit	–	1	–	Bit
	Data bit	–	8	–	Bit
	Check bit	–	–	–	Bit
	Flow control bit	–	–	–	Bit
Electrical performance (room temperature)
Tension de fonctionnement		3.3	3.6	5	V
Operating current (average)		–	30	–	mA
Operating current (instantaneous)		–	250	320	mA

 

Note: Tous les gaz et cuisinières ne sont pas répertoriés, si vous avez besoin de plus d'informations, veuillez nous contacter.

 

ÉTIQUETER: otywell gas sensor，Capteur de méthane laser, O2 sensor ，H2S sensor，CO sensor,PID sensor,voc sensor

 

E-mail:enquête@otywell-safety.com

Mobile / whatsapp:+8616692113216