أوتيويل | مصنع محلل الغاز
وصف
Electrochemical Carbon monoxide gas sensor utilizes the electro-chemical activity of the gas under measurement to undergo elec-trochemical oxidation or reaction inside it, thereby converting the content of the gas under measurement into a current (or voltage) signal output to distinguish the composition and concentration of the gas.
ميزات وظائف
- Fast response and recovery time
- High stability
- Robust at humidity and temperature extremes
- Meets sensor requirements outined in: AQ6205-2006 and EN5544
المعلمات الفنية
| Performance Characte ristics | |
| Output signal | 70 ± 250 nA / جزء في المليون |
| Typical Baseline Range (pure air) | ≥±2 ppm CO equivalent |
| Fiter Capacity | ﹥2000 ppm hours |
| T90 Response Time | < 30 seconds |
| Measurement Range | 0 – 2000 جزء في المليون |
| Maximum Overload | 5000 جزء في المليون |
| Linearity | Linear up 2000ppm |
| Repeatability | < ±2% CO equivalent |
| Recommended Load Resistor | 10 ohms |
| دقة (Electronics dependent) | < 0.5 ppm typical |
| Environmental | |
| Temperature Range Continuous | -30oC to +50oC |
| Pressure Range | 800 to 1200 mbar |
| Operating Humidity Range | 15% to 90% RH |
| Lifetime | |
| Long Term Output Drift | < 5% per annum |
| Recommended Storage Temp | 0oC to 20oC |
| Expected Operating Life | > 24 months in air |
| Standard Warranty | 24 months from date of dispatch |
| Intrinsic Safety Da ta | |
| Maximum at 2000 جزء في المليون | 0.3 mA |
| Maximum o/c Voltage | 1.3 V |
| Maximum s/c Current | <1.0 A |
WeChat
مسح رمز الاستجابة السريعة مع WeChat